AUGVAPE TEMPLAR 24MM

Features:

  • 24mm Diameter
  • Two Post Build Deck
  • Velocity Clamp Snag System
  • 2.5mm by 1mm Slot Space
  • 24K Gold Plated Deck
  • 4mm Deep Juice Well
  • ULTEM Single Coil Chamber Reducer
  • Adjustable Dual Airslots
  • Frosted Top Cap Redirected Airflow
  • 3mm by 2mm
  • Rounded Internal Top Cap
  • 24K Gold Plated 510 Contact
  • 810 Drip Tip Fitment
  • 510 Drip Tip Adapter

The biggest feature you have with the new Templar RDA is their new “velocity clamp system“. This post design makes building and installing coils simple and gives you amazing conductivity. Just screw in the top titanium screw and the clamp closes. Unscrew and the clamps open. Simple as that.

 

The Templars airflow comes in from the side, hits the coils then goes up into your face. (Seen below)

With the Templar, you also get a replacement top cap. This is a clear cap tio turn the RDA into a  straight cloud machine. (seen below)

Pick up a Templar RDA for $34.99 VaporDNA.com


GEEKVAPE LOOP BOTTOM AIRFLOW BF RDA

GeekVape Loop

Features:

  • 24mm Diameter
  • W Shaped Build Deck
  • Four Terminals
  • 3mm by 2mm Per Terminals
  • Juice Flow Splitter in Center
  • Angled Bottom Airflow Design
  • Independent Airflow Adjustment
  • Gold Plated 510 Contact
  • Squonk-Ready 510 Pin
  • 10mm Tapered Bore Delrin Drip Tip

GeekVape Loop

One of the biggest features with the new GEEKVAPE Loop RDA is the “W” Shaped build deck. This is said to be easier to build on as well as “Allows direct dripping from the mouthpiece without leakage”.  As you can see in the image (above) you can build a single or dual coil setup with the loop.

Also when squonking the juice will come up at the peak of the W. Directly in the middle.

GEEKVAPE LOOP RDA Airflow

The airflow on the Loop is a Side to bottom airflow design. This design is suppose to give you more flavor and produce great amounts of clouds. (seen above).

Pick up a GeekVape Loop Bottom Airflow BF RDA for $29.99


GAS MODS G.R.1 22MM BF RDA

Gas Mods GR1 RDA

Features:

  • 22mm Diameter
  • Dual Terminal Post-less Style Build Deck
  • 1mm Each Terminal
  • Top Mounted Hex Screws
  • 4mm Deep Juice Well
  • Juice Flow Splitter in Center
  • Interchangeable Slanted Airflow Jets
  • Two Airflow Jets Per Side
  • Directs Airflow Directly Onto Coil
  • Two Wide Airflow Jets Per Side
  • Interchangeable Jets 1mm or 5mm per jet
  • 24K Gold Plated Bottom Feed 510 Contact

Gas Mods G.R.1

The Gas Mods G.R.1 RDA is a tiny little guy with big ambitions. The G.R.1 features a single coil deck with slanted airflow jets. The coil sits nicely between these jets, when you take a hit the air comes in, slams into the coils then coils up to your face. This produces amazing clouds and flavor. (Seen Below)

The G.R.1 comes with two types of interchangeable airflow jets. One is the regular 1mm jet, the other is a massive 5mm airflow jets that will provide you with MASSIVE amounts of airflow to the coils. More airflow equals more clouds and flavor.

The juice well on the G.R.1 is massive, measuring in 4mm deep. Another feature with the G.R.1 is its an amazing RDA for squonking. It comes with a 24k gold bottom feeder 510 contact,

Pick up a GAS MODS G.R.1  for $34.99


HOTCIG CASTLE 22MM BF RDA

Features

  • 22mm Diameter
  • Single Post Build Deck
  • 2mm by 1mm Each Terminal
  • Top Mounted Flat Head Screw
  • PEEK Insulator
  • 4mm Deep Juice Well
  • adjustable side Airflow Systems
  • 3mm Airslot
  • 8mm Bore 510 Delrin Drip Tip
  • Bottom Feed 510 Ready:

HOTCIG Castle Deck

One of the first things you notice when looking at the deck is the massive juice well surrounded by blobs of metal. With nothing that looks like a traditional post setup. The Castle by HOTCIG  takes the postless deck setup and adds their tweaks and mods to it. This is a single coil build deck with 2 x 1 mm terminals.

HOTCIG Castle Deck

As you can see in the image (above) the coil is held nicely in place via the two flat head screws.

The Castle also comes with the clear acrylic top cap that gives the Castle a whole new feel. Plus its kinda cool to see the coils heating up when you take a hit.

Pick up a HOTCIG CASTLE 22MM BF RDA  $24.99

 


GEEKVAPE ATHENA TOP AIRFLOW BF RDA

GEEKVAPE Athena RDA presented by Olympia Vapor Works

Features:

  • 24mm Diameter
  • Postless Quad Terminal Style Build Deck
  • Outer Terminals
  • 3mm Per Terminals
  • Coils Held Down by Flathead Screws
  • Juice Flow Splitter in Center
  • Angled Top Airflow Design
  • 9mm by 3mm
  • Fully Closeable
  • Gold Plated 510 Contact
  • Squonk-Ready 510 Pin
  • 304 Stainless Steel
  • 10mm Bore ULTEM Drip Tip
  • 9mm Bore Delrin Drip Tip

The Athena has a top-down airflow system that brings. As seen in the image (above) The airflow comes in from the sides around the top cap, flows down to the coils then back up to your face.

The deck features a postless deck design.  Able to hold two coils this postless design is easy to build on and practical.

Pick up a GEEKVAPE ATHENA TOP AIRFLOW BF RDA for $29.99

 

Keep the Education Going

Bottom Feeding Box Mod Kits (SQUONK) Over the years bottom feeder box mods aka Squonking mods have grown and changed to become better and better as time moves on. Now many years later the...
5 RDA’s for 2018 (Squonk Approved) In the process of making this article, we soon found out all the RDA's picked were squonk ready or highly suggested squonk RDA's. If you don't know...
6 New RTA’s for September 2016 It's September and summer is coming to an end. It's been a busy summer here and a busy summer for the Vaping industry. We have some very unique and in...
7 New Sub-Ohm Tanks for July 2016 GeekVape Eagle Sub-Ohm Tank The all new GeekVape Eagle Sub-Ohm Tank is the first Sub-Ohm Tank to come out of the GeekVape factory. Typically ...
orders will go monday noon Orders placed in our Shop will be shipped the following work day at noon. If your looking for a specific product you can search out our Master List fo...

Pin It on Pinterest