A good starter kit is always nice. Whether you are just starting out with vaping or want something new, starter kits are great because they give you most everything you need in one shot. Plus they usually match or were picked because they work well together.

These are some great choices if you are looking for something new.

SMOK Mag 225W TC Kit

Who would this be good for?  This kit is about as middle of the road as you can get. Able to pump out up to 225 Watts to make the cloud chasers happy and the tank has the ease of use.

Specifications:

SMOK Mag 225W Mod

  • Dimensions: 92mm by 65mm by 30mm
  • Zinc Alloy Construction
  • Powered By Two High Amp 18650 Batteries (Sold Separately)
  • Output Mode: VW / TC-Ni / TC-Ti / TC-SS / TCR
  • Drawing Power: SOFT / NORM / HARD
  • Wattage Range: 6W – 225W
  • Voltage Range: 0.5V – 9.0V
  • VW Resistance Range: 0.1Ω – 3.0Ω
  • TC Resistance Range: 0.05Ω – 3.0Ω
  • Temperature Range: 200°F – 600°F / 100°C – 315°C
  • Preheat Functionality
  • 1.0″ Colored OLED Display
  • 6 User Interface Color Options
  • Large Trigger Style Firing Button
  • Ejecting & Locking Bottom Battery Sled
  • Micro USB Rechargeable
  • Firmware Upgradeable
  • Protections: Short Circuit, Over-Heat, Low-Battery, 12 Seconds Cut-Off, Over-Discharge

 

SMOK TFV12 Prince Sub Ohm Tank

  • 25mm Base Diameter
  • 28mm Glass Tank Diameter
  • With 8ml Convex Glass Tube
  • Stainless Steel & Pyrex Glass Construction
  • Patented Hinge & Lock Top Fill Design
  • 5ml/8ml E-Liquid Capacity
  • New Included Patented TFV12 Prince Coils
  • V12 Prince-Q4 0.4Ω Quadruple Coil
  • Wattage Range: 40W – 100W (Optimal At 60W – 80W)
  • V12 Prince-T10 0.12Ω Decuple Coil
  • Wattage Range: 60W – 120W (Optimal At 80W – 110W)
  • Dual Adjustable Bottom Airflow Slots
  • 14.5mm by 2mm Airflow Slots

Price: $69.00 (At Eciggity)


Aspire Speeder 200W Kit

Who would this be good for?  Typically Aspire tanks are geared for the new vapers. This tank comes with some serious coil heads that can pump out some serious clouds. This kit would be great for anyone who maybe had a small stick vape and want to upgrade or a serious vaper who wants to chase those clouds. Just remember the mod goes up to 200 watts. That should be enough to keep 90% of the vapers happy.

Specification:

Aspire Speeder Mod

  • Dimensions: 46mm by 31mm by 88mm
  • Powered By 2 High Amp 18650 Batteries (Sold Separately)
  • Wattage Range: 1W – 200W
  • Voltage Range: 0.1V – 8.4V
  • Resistance Range: 0.05Ω – 1.5Ω
  • Output Mode: VW, VV, Bypass, TC-Ni200, TC-Ti, TC-SS316L, TCR-M1,M2,M3, CPS-C1,C2,C3
  • Temperature Range: 100°C – 315°C / 200°F – 600°F
  • 0.96” OLED Screen
  • Auto-Rotating Display
  • Spring Loaded 510 Pin
  • Side-Firing Bar
  • Hinge & Lock Battery Door
  • Micro USB Rechargeable
  • Firmware Upgradeable

 

Athos Sub Ohm Tank

  • 25mm Diameter
  • Stainless Steel & Pyrex Glass Construction
  • Threaded Top Fill Design
  • 4ml Tank Capacity
  • Athos Coil Heads
  • A3 0.3Ω Triple Coil
  • 60W – 75W
  • A5 0.16Ω Penta Coil
  • 100W – 120W
  • Dual Adjustable Bottom Airflow

Price: $54.99 (Available at eciggity)


SMOK G-Priv 2 230W Kit

SMOK G-Priv 2 230W Kit

Who would this be good for? The tank that this kit comes with is the TFV8 Baby Beast. The same tank I run with. You can use the pre-made coil heads or you can use the RTA deck to build your own coils (or install premade coils). This tank is more for the moderate to advanced vapers. However new vapers can get on board with this kit because of the coil heads you can use.

Specification:

SMOK G-Priv 2

  • Dimensions: 85mm by 52mm by 27.3mm
  • Zinc Alloy & Carbon Fiber Construction
  • Powered By Two High Amp 18650 Batteries (Sold Separately)
  • Output Mode: VW-Soft / VW-Normal / VW-Hard / VW-Max / TC-Ni / TC-Ti / TC-SS / TCR
  • Wattage Range: 1W – 230W
  • Voltage Range: 0.5V – 9.0V
  • VW Resistance Range: 0.1Ω – 2.5Ω
  • TC Resistance Range: 0.05Ω – 2.0Ω
  • Temperature Range: 200°F – 600°F / 100°C – 315°C
  • Preheat Functionality
  • 2.0″ OLED Colored Touch Screen Display
  • IPS 200PPI (20% Sharper/Clearer Than G-Priv)
  • 6 User Interface Color Options
  • User-Friendly Touch Screen Interface
  • Screen Lock Button
  • Side-Firing Bar
  • Carbon Fiber Magnetic Battery Cover
  • Micro USB Rechargeable
  • Firmware Upgradeable
  • Protections: Short Circuit, Over-Heat, Low-Battery, 10 Seconds Cut-Off

 

SMOK TFV8 X-Baby

  • 24.5mm Diameter
  • Stainless Steel & Pyrex Glass Construction
  • Top Fill Hinge Design
  • 4ml Tank Capacity
  • TFV8 X-Baby Coils
  • Quad Airflow Channels Inside Coil Housing For Top Airflow Compatibility
  • TFV8 X-Baby Q2 0.4Ω Dual Coil
  • Wattage Range: 40W – 80W (Optimal At 55W – 65W)
  • TFV8 X-Baby T6 0.2Ω Sextuple Coil
  • Wattage Range: 40W – 130W (Optimal At 70W – 90W)
  • Dual Adjustable Top Airflow Slots
  • Wide Bore Delrin 810 Drip Tip
  • Non-Adjustable 510 Pin

Price: $79.99 (Available at eciggity)


Reuleaux RX GEN3 Kit by Jaybo Design & Wismec

 Reuleaux RX GEN3 Kit by Jaybo Design & Wismec Reuleaux RX GEN3 Kit by Jaybo Design & Wismec Reuleaux RX GEN3 Kit by Jaybo Design & Wismec Reuleaux RX GEN3 Kit by Jaybo Design & Wismec Reuleaux RX GEN3 Kit by Jaybo Design & Wismec

Who would this be good for?  The RX GEN3 mod can pump out up to 300 watts of face melting power. That alone would hint that this is geared for moderate to advanced vapers. The GNOME sub ohm tank used coil heads so that would be easy for a new vaper. All in all this kit would be pretty good for just about anyone who wants a good vape that can cover all bases.

Specifications:

Reuleaux RX GEN3

  • Dimensions: 48.8mm by 39.3mm by 113.7mm
  • Powered By 3 High Amp 18650 Batteries (Sold Separately)
  • Output Wattage: 1W – 300W
  • Output Mode: VW, TC-Ni200, TC-Ti, TC-SS, TCR-M1,M2,M3
  • Temperature Range: 100°C – 315°C / 200°F – 600°F
  • VW Resistance Range: 0.1Ω – 3.5Ω
  • TC Resistance Range: 0.05Ω – 1.5Ω
  • Maximum Output Current: 50W
  • Maximum Charging Current: 2A
  • Preheat Functionality
  • Improved 1.3″ OLED Screen & User Interface
  • Gold Plated Spring Loaded 510 Pin
  • Locking Battery Cover
  • Balanced Charging
  • Dual Circuit Protection
  • Reverse Polarity Protection
  • Upgradeable Firmware
  • Micro USB Rechargeable

GNOME Sub Ohm Tank

  • 25mm Diameter
  • Stainless Steel & Pyrex Glass Construction
  • Retractable Top Fill Design
  • 4ml Tank Capacity
  • WM Coil Heads
  • WM01 0.4Ω Single Coil
  • 40W – 80W (Optimal At 55W – 65W)
  • WM02 0.15Ω Dual Coil
  • 30W – 70W (Optimal At 45W – 60W)
  • WM03 0.2Ω Triple Coil
  • 40W – 130W (Optimal At 70W – 90W)
  • Dual Adjustable Bottom Airflow
  • 510 Drip Tip Compatible
  • Non-Adjustable 510 Pin

Price: $56.99   (Available at eciggity)


Eleaf iStick Pico Resin Kit

Who would this be good for? The iStick Pico resin kit by iStick is a great choice for new vapers. Mostly because of the tank it comes with is simple, easy to use and not much to get confused about. Just pop in a new coil head and vape on. Some of the tanks in this list require more to rebuild or setup.

Specification:

iStick Pico Resin 75W TC

  • Dimensions: 45mm x 23mm x 70.5mm
  • Powered By Single High Amp 18650 Battery (Sold Separately)
  • Modes: VW / Bypass / TC-Ni / TC-Ti / TC-SS / TCR-M1, M2, M3
  • Output Wattage: 1W – 75W
  • VW/Bypass Mode Resistance Range: 0.1Ω – 3.5Ω
  • Temperature Control Mode Resistance Range: 0.05Ω – 1.5Ω
  • Temperature Range: 100ºC – 315ºC / 200ºF – 600ºF
  • Resin Chassis
  • Stunning Multicolored Pattern
  • Top Battery Insert
  • Spring Loaded 510 Connection
  • OLED Display
  • Micro USB Charging/Firmware Upgradeable
  • Ventilation Holes

Melo III Mini

  • 22mm In Diameter
  • 304 Stainless Steel Construction
  • 2ml Tank Capacity
  • Top Fill Design
  • Invisible Airflow Control
  • Heat Insulated Drip Tip

Price: $64.99   (Available at eciggity)

Keep the Education Going

5 Simple Mistakes New Vapers Make New vapers are a beautiful thing. But like all Newbs they know not what they do. I was no different. I made most of these same mistakes. So it is my j...
8 Best A.I.O (All In One) Vaping Systems Recently I wrote/Updated an article that featured "Bottom Feeder Box Mods". In that article we featured a few AIO systems because the mechanics and de...
6 New RTA’s for September 2016 It's September and summer is coming to an end. It's been a busy summer here and a busy summer for the Vaping industry. We have some very unique and in...
7 MORE Sites to Find Cheap E-Cigs, Mods and Attys ... Our first article 7 Sites to Find Cheap E-cigs Mods and Attys was so popular that we decided to give ya some more cheap clone greatness for your to fe...
How to Build a Custom Box Mod Yes my friends, it is time for those out there who are electronically inclined enough to do this. If you are then you will love these 5 Videos on buil...

Pin It on Pinterest