Cloud chasing is becoming more and more popular, and because of this more and more new vapers are wanting to get into “cloud chasing” asap. One of the issues with this is as a new vaper working building sub-ohm coils and working with electricity this way can be dangerous.
I think a better route for a new vaper is to start with a tank such as the Kanger Subtank that has pre-built coils you can buy but also has the ability to give you huge clouds without the need to have to build the coils.
I should note that if you are beginning out with vaping I would suggest not getting a tube mod and dripper until you fully understand the basics of electricity and coil building 101
So with safety and Cloud Chasing in mind lets take a look at a few bundles we found.
Micro One Starter Kit
The Smok Micro one kit is a great start kit for anyone looking for a new mod or a new vaper. Featuring Temp control capabilities while also able to push out up to 80 watts. One great feature is that even though this is TC ready you can run Nickel, kanthal, titanium and steel coils. Something not all TC mods can do. The Built in 4000mah battery is perfect for keeping you vaping all day long.
The Smok Micro TFV4 tank was customized specifically for the Micro One box mod. The TFV4 holds 2.5 ml’s of juice but comes with an extension glass section to allow the TFV4 to hold up to 3.5 mls
- Micro One Specification
- 80W Max Wattage
- Built in 4000mah Battery
- Intelligent Atty recognition
- Overheating Protection
- Short Protection
- Low battery warning
- Spring loaded 510 connection
- Adjustable Airflow control
- Micro TFV4 Tank Specifications
- 22mm Diameter
- 2.5ml tank Capacity or 3.5ml (W.extension)
- Dual Quad Adjustable Airflow
- Top Refill System
- 30 to 60W
Grab a Micro One Starter kit for around $60.00
IPV4 plus Kanger Subtank
The IPV4 is a great regulated mod by
, with user-friendly features like circuit protection and battery protection as well as possibly the best feature for new vapers is reverse battery protection. The IPV4 can go be adjusted from 7-100W and also run in temp mode, meaning rather than a specific wattage you run in a specific temperature. This is a very well build mod and its the one I personally use for my daily mod.
To go along with the IPV4 they give you the Kanger Subtank. A great option for the new vaper that wants to produce clouds. Designed for sub ohm vaping in mind, the Subtank “transforms from a convenient 1.2 or 0.5 ohm tank atomizer to a powerful 0.5 ohm RTA in three quick steps” making it perfect for anyone who wants to learn how to build coils but also be able to use pre-built ones.
- IPV4s Specifications
- Output wattage: 10W – 120W
- Input Current: 1.3A – 40.0A
- Input Voltage: 6.2V – 8.5V
- Temperature limit Fahrenheit: 212˚F – 572˚F
- Software Upgrade/GUI operate
- Low voltage/ Resistance protection
- High Input voltage warning
- Output short/ reverse battery protection
- Kanger Subtank Mini Specifications
- 4.5ml liquid Capacity
- Updated airflow control valve with two channels
- Mini RBA Base Plus allows you to build your own coils
- 304 stainless steel
- PEEK insulator
Grab the IPV4s Kit for $100-140 (depending on options)
The Topbox is the KBOX Mini TC 75W Mod and the TOPTANK Mini. Able to pump out up to 75 watts and able to run in Temp mode and can fire nickel, titanium, stainless, and Ni-Chrome wire.
The Toptank mini holds up to 4mls of juice that you fill with their top fill system for less spilling.
- KBox Specifications
- Temperature Control Range: 100 – 300C / 200 – 600F
- Wattage output: 7-75W
- Min Resistance: 0.1 ohm
- Micro USB Port
- Magnet battery cover
- Short/Open circuit protection
- Low Battery Warning
- Spring-loaded 510 Contact Pin
- TopTank Mini Specifications
- 22mm Diameter
- 4.0ml e-Liquid Capacity
- Top Fill Feature
- Adjustable Airflow Valve
- Compatible with the new SSOCC Atomizer Heads
Grab the TopBox Mini Kit
These Cloud Chasing Starter kits are just the tip of the iceberg. More companies are coming out with new kits all the time so stay tuned for more articles in the future