Vaporesso Revenger X 220W Mod

Features:

  • Dimensions: 89mm x 45mm x 28mm
  • OMNI Board 2.2
  • In-Mould Labeling (IML) & Aluminum Alloy Construction
  • Powered By Two High Amp 18650 (Sold Separately)
  • Output Mode: VW / TC-Ni / TC-Ti / TC-SS / TCR-M1, M2 / CCW (VW Curve Mode) / CCT (TC Curve Mode) / BYPASS
  • Drawing Power: Soft / Normal / Hard
  • Wattage Range: 5W – 220W
  • Resistance Range: 0.05Ω – 5Ω
  • Temperature Range: 100ºC – 315ºC / 200ºF – 600ºF
  • 0.96” OLED Display
  • Real Time Clock (RTC) Setting
  • 16 Tier Brightness Setting
  • 3 Responsive Touch Screen Buttons
  • Haptic Feedback
  • Mobile Specific Vibration Motor
  • 8 Tier Vibration Setting
  • Large Tactile Firing Button
  • Magnetic Battery Panel
  • Spring Loaded Gold Plated 510 Pin
  • 2.5A Micro USB Balanced Charging
  • Firmware Upgradeable

The Vaporesso Revenger X is the newest mod from Vaporesso, First thing you notice when you fire up the Revenger X is how slick and smooth everytihng is. The display is big to help see what you need to do but the buttons are hidden. (As seen above) The buttons slightly light up and when you hit one you will get a cool vibration letting you know that you pressed the button, much like on our cellphones.

From the screen, you can do just about anything you will need to. And Vaporesso with the new OMNI board will make sure you get there. The Revenger can pump out up to 220 Watts or 600ºF of vaping power.

The Revenger X is powered by two 18650 batteries that should last all day long. They will be held in place via the back plate secured by three strong magnets.

Pick up a Vaporesso Revenger X 220W for around $51.99 from Eciggity.com


PIONEER4YOU IPV XYANIDE 200W

Features:

  • YiHi SX460 Chip Set
  • 5 to 200W
  • 1.0V to 9.5V
  • 0.15 to 3.0 Ω Atomizer Resistance Range
  • Flavor Mode – Soft – Standard – Powerful – Powerful+
  • Temperature Control
  • Joule Mode
  • TCR Functionality
  • 0.05 to 3.0 Ω Atomizer Resistance Range
  • 212 to 572 Degrees Fahrenheit
  • LED Lights Located on the IPV Logo
  • Four Button Control Face
  • Top Firing Button
  • Puff Counter
  • Lock Unlock
  • Taste Mode
  • Micro USB Port
  • Bottom Latch Door Battery Door
  • Accepts Two High Amperage 18650 Batteries
  • 29mm 510 Connector
  • Spring Loaded Gold Plated 510 Connection

The IPV XYANIDE is a 200 Watt mod from PIONEER4U. This time around its powered by the YiHi SX460 Chip Set that gives you amazing temp control that you can crank up to 572 degrees.

(Seen Above) You can see the screen on the IPV XYANDE is nice big and bright also very easy to see. Some mods like the Vaporesso Revenger X covers the screen with a clear plastic cover that will hide the screen when its powered off. This makes for a slick appearance but greatly diminishes the viewability of the screen

The IPV XYANDE is powered by two 18650 batteries that are held in place via the swing open cover. Just press the little button and the door flops down for easy insertion.

.Another thing about most Vaporesso mods are is the quality of parts. For instance, the 510 connection is springloaded and gold plated. This gives you amazing conductivity.

PIck up a PIONEER4YOU IPV XYANIDE 200W for $59.99 at VaporDNA.com


AUGVAPE V200 200W BOX MOD

Features:

  • 5 to 200W Output Range
  • 0.05 to 3.0 ohm Atomizer Resistance Range
  • Bypass Mode
  • 0.96 Inch OLED Display
  • Four Column Display
  • Individual Battery Life Indicator
  • Oversize Hidden Firing Button and Rotating Button
  • Oversize Firing Button
  • Blends into the Screen
  • Analog Trigger for Settings
  • 1.2A Max Charge Current
  • Bottom Latch Battery Access Door
  • Gold Plated Spring Loaded Connections
  • Accepts Two High Amperage 1865 Batteries
  • Stainless Steel 510 Threading
  • Spring Loaded Gold Plated Contact

The Augvape V200 Box mod was designed to look like the VTech sports car engine. They did a pretty amazing job at keeping the look of the real engine while keeping the mod functional.

Every design feature takes after the Honda Vtech engine. As you can see in the image (above)  the oil cap has been turned into the rotating menu dial on the mod and the carbon fiber middle area of the engine was turned into the display and firing button.

The display on the Augvape VTec mod is nice and clear to read. Big bold letters and numbers make for even easier viewing. On the display at all times you have all the info needed from watts, resistance, voltage as well as a battery meter for both batteries.

Like we talked about earlier the firing button is hidden. To fire the Vtec you simply press in on the top of the black display area. You will get a green LED that will show you exactly where to press. (seen above)

The Augvape Vtec is powered by two 18650 batteries that are held snug in place via the swing open battery door at the bottom of the mod. Overall the quality is really nice and I am even considering picking up one myself.

Grab an Augvape Vtec 200 Watt for $69.99 from VaporDNA.com


Smoant Cylon 218W Box Mod

Features:

  • Dimensions: 47mm by 32mm by 90mm
  • Powered By Two High Amp 18650 Batteries (Sold Separately)
  • Utilizes the Ant218 V2 Chip With a Faster Response When Firing
  • Fires Virtually Instantly In Only 0.015 Seconds
  • Side-Firing Button
  • Firmware Upgradable
  • Wattage Range: 1W – 218W
  • Output Mode: VW (Min, Norm, Hard, Max, VW Curve) / TC-Ni / TC-Ti / TC-SS / TCR / TC Curve
  • VW Resistance Range: 0.1Ω – 3.0Ω
  • TC Resistance Range: 0.05Ω – 2.0Ω
  • Temperature Range: 100°C – 300°C / 200°F – 600°F
  • Max Current Output: 50A
  • Max Voltage Output: 8.4V
  • 1.35″ Color TFT Screen
  • 2 UI Options
  • Customizable Wallpaper
  • Spring Loaded Gold Plated 510 Pin
  • Can Accommodate Atomizers Up to 30mm in Diameter
  • Safety Protections: Reverse Battery, Switch Timeout, Low Voltage, Overheat, Short Circuit, Overcharge

The display on the Smoant Cylon is really nice to look at. Taking design cues from the automotive industry yet again. The thing about this is that it works pretty well for a display. Easy readout of most of your wanted info.

The two 18650 batteries are placed on the bottom of the mod behind the swing open door.

Smoant Cylon 218W box mod features custom power curves. This will fluctuate the power to your coils in the first 10 seconds giving you the perfect vape every time.(Seen Above)

Pick up a Smoant Cylon 218W Box Mod for about for $62.99 from Eciggity.com


SMOK X-Priv 225W Mod

Features:

  • Dimensions: 88mm by 46.5mm by 30.4mm
  • Zinc Alloy Construction
  • Powered By Two High Amp 18650 Batteries (Sold Separately)
  • Output Mode: VW / TC-Ni / TC-Ti / TC-SS / TCR
  • Drawing Power: SOFT / NORM / HARD
  • Wattage Range: 1W – 225W
  • Voltage Range: 0.5V – 9.0V
  • VW Resistance Range: 0.1Ω – 2.5Ω
  • TC Resistance Range: 0.05Ω – 2.0Ω
  • Temperature Range: 200°F – 600°F / 100°C – 315°C
  • Preheat Functionality
  • 2.0″ Colored High-Definition OLED Display
  • 6 User Interface Color Options
  • Large Side Firing Bar
  • Magnetic Battery Panel
  • Micro USB Rechargeable
  • Firmware Upgradeable
  • Protections: Short Circuit, Over-Heat, Low-Battery, 12 Seconds Cut-Off, Over-Discharge

The SMOK X-Priv 225W is the newest and greatest from SMOK. They always bring us great products like the TFV series of tanks and many other products. This time around we have a really beautiful mod. With a giant 2 inch OLED display.

To fire the X-Priv you push in on the side. This is a pretty easy to use design. (Seen Below)

One of the nice things about these SMOK devices is all the safety features you get. No longer are we in the days of mechanical mods that could blow up if you put in the wrong coil. With short circuit protection, over discharge protection and over-heating protection, the X-Priv will help to keep you safe.

One of the more flashy features of the X-Priv is the newly designed UI. You can also choose from 6 color settings that will change the whole look of the display. Now you can match your vape to your clothing. FInally!! (seen below)

Pick up a SMOK X-Priv for TBA from Eciggity.com

Keep the Education Going

5 RDA’s for 2018 (Squonk Approved) In the process of making this article, we soon found out all the RDA's picked were squonk ready or highly suggested squonk RDA's. If you don't know...
5 Must Have RTA’s for 2018 Vandy Vape Kensei Specifications: 24mm Diameter Base Threaded Top Fill Design 4ml Maximum Capacity Bubble Glass Tube Staggered H...
5 Must Have Sub-Ohm Tanks for 2018 It's 2018 and the Sub-Ohm Tank is still king. Mostly for the same reasons they have always been a fan favorite. Ease of use, heavy hitting, relatively...
E-ciggarette Starter Kits 2018 A good starter kit is always nice. Whether you are just starting out with vaping or want something new, starter kits are great because they give you m...
Building a Custom Box Mod 2 Today I want to share with you two Box mod Build guides. the first one will be  a Hammond 1590A DNA 40 Box Mod Build The second will be a 4 part se...

Pin It on Pinterest