Recently I wrote/Updated an article that featured “Bottom Feeder Box Mods“. In that article we featured a few AIO systems because the mechanics and design are sort of like bottom feeders but in fact they weren’t. So I told a reader that pointed this out that I would write a new article with all AIO devices and re-Re Do the article on Bottom Feeders that will only have true Bottom Feeders.

All of these systems except for maybe one are all AIO systems (All In One). That means that the juice, mod, battery coils are all in one thing. You buy this one thing charge it, fill it with juice and go.

Artery Summa AIO

Artery Summa AIO Box Mod


The Storm Troopers Mod of Choice

The Artery Summa looks like if the Star Wars stormtroopers had a mod that came with their armor. The Summa AIO is a sleek and modern looking device.
Featuring adjustable top down airflow that you can quickly adjust by twisting the top ring around the drip tip (Fig:1). The manufacturer says that the airflow adjustment is to switch between mouth to lung hits and direct lung hits.

The tank section of the Summa can hold up to 5mls of juice making it a great option to take with you on the road and should last you most of the day. You can fill the tank quickly from the bottom (Fig:3). Just remove the door and you see 4 filling holes. Although bottom fill systems are notorious for leaking. IE Kayfun V1, Nebox.

The Summa can push out up to 70W or 600°F in Temp control mode. This is  perfect for almost all vapes. Unless you are chasing clouds. But the cloud chasers will like the fact that you can fire coils down to 0.1Ω. This is extremely low for an AIO system. The Summa was designed small and to fit a single battery that can be charged onboard via the USB port. But it is always best to charge them via a dedicated charger. The market is getting used to this with all of the smaller mods coming out so that shouldn’t be a deal-breaker for such a cool little device.

Summa Specifications

  • Dimensions: 98.5mm X 56.3mm X 23mm
  • Material: Aluminum Alloy 6063
  • Output Voltage: 0.5V – 8.0V
  • Output Wattage: 5.0W – 70W
  • Temperature Range: 200°F – 600°F
  • Resistance Range 0.1Ω – 3.0Ω
  • Tank Capacity: 5ml
  • Adjustable Airflow Control
  • Micro USB Charging Port

Pick up an Artery Vapor Summa AIO Mod for around $46.00

Artery Vapor Summa AIO Mod


eLeaf Istick Basic

iStick_basic_aio_img_1


The Maybe Not AIO AIO

The tiny Eleaf Istick Basic is a very tiny little device. In fact, it is so small they had to use an internal battery as an 18650 would not fit. The internal battery is pretty strong for its size an f 2300mAh internal battery. This battery will last most of the day when you are vaping often, but I can imagine that after a year with this mod the battery life will be drastically shorter.

One downside to the istick, at least to some people is the lack of adjustable Voltage or wattage or temp. Nothing. You get what the coils give you. So if you want to change the wattage you need to change the coil/head to a higher or lower Ω. The coils that are used are GS Air Atomizer Heads. You have three options for heads. The GS Air Head (1.5Ω), the Pure Cotton Head (1.2Ω) and the Pure Cotton Head (0.75Ω). Basically, if you want to change the wattage you change the coil to a higher or lower Ω.

The tank that goes with the Istick is the GS Air 2 Atomizer(14mm). This tank will hold up to 2ml’s of juice, being a clearomizer style design its easy to see why it holds such a small amount. One cool feature with the tank is that when you drop the tank into place it is help there with magnets to help make sure a solid connection (Fig:3). It looks like the magnetic connector will allow you to use all 510/eGo style atomizers.

Istick Basic Specifications

  • Dimensions: 39.5mm X 23mm X 81mm
  • Battery Capacity: 2300mAh
  • Resistance Range: 0.4Ω – 5.0Ω
  • Magnetic Atty Connection (Easy Tank Install)
  • Tank Capacity: 2ml
  • Dual Slotted Adjustable Airflow
  • Micro USB Charging Port
  • Coil Options: 0.75Ω, 1.2Ω and 1.5Ω

Pick up an eLeaf iStick Basic for around $30.00

eLeaf iStick Basic


Digirette

Digirette AIO Device


Taking AIO to a whole new level

Where do I begin with this thing? The tank on the Digirette is sold with the juice in a pre-packaged ready to rock cartridge with the drip tip already molded to the body of the cartridge.(Fig:1) Because of this, you won’t be able to use any juice other than the juice they sell. The idea is the same as the BlueCigarettes that were really big a few years ago. They sell the juice the tank and the mod all in one package. The cartridges hold 5ml’s of juice and will run you around $6 each.

I think this idea will appeal to some people who may not be experts yet on vaping but want to make the change to vaping as easy as possible. Without messing with coils and what tank to get. You just buy it and live the Digirette way of life. You must drink the Digirette “kool-aid” as they say.
You may think that something like this would vape about as good as a Blu e-cig. But you would be wrong. You actually get a decent sub ohm coil. around 0.5Ω of vaping happiness. The coils also come in the juice cartridge.

The 2000mah Li-ion battery should keep you vaping most if not all day long. Yet when it comes time to replace the battery You will most likely have to shell out another $49.95 for another mod. The battery is then charged via the USB connector.

Digirette Specifications

  • Tank Capacity: 5ml
  • Used Cartridges VS Using Own Juice
  • USB Charging
  • The Juice is a 50/50 VG/PG Blend
  • 2000mah Internal Battery
  • 10 E-Juice Flavors Available

Pick up a Digirette for around $50.00

DIGIRETTE Closed System AIO


Joyetech eGo AIO

Color Changing Child Proof Device

The Joyetech eGo is Joyetechs hat in the AIO market. This is a TRUE AIO in that the tank doesn’t come apart and you can’t use another tank on this device. It is the battery, tank and mod All In One.

The tank holds 2ml’s of juice in a Cubis platform. Because of this, it features dual airflow adjustment and the Sub-ohm BF SS316 Coils that run at around 0.6Ω. To fill the tank you need to unlock the top cap with the child-proof lock that you (press in and twist) much like a pill bottle (Fig:2). Not sure how useful this will be in keeping kids away from juice but I do love the idea behind it.

One neat but purely vain feature is the little LED lights that are behind the glass of the tank. Giving it a nice colored glow. You can change the color of the LED to one of 7 colors. Red, Yellow, Green, Blue, Indigo, White and Purple. If this feature is just annoying and I have a feeling it could be you can luckily turn it off.

The eGo is a really great option for anyone looking to start vaping or just wants an easy to use mod. Another great feature for new and well all vapes is the protection that comes with it. You get Dual Circuit protection, over charge protection, over current protection, and over discharge protection.

eGo Specifications

  • Dimensions: 19mm X 118.05mm
  • Internal Battery: 1500 mAh
  • Micro USB Charging Port
  • Tank Capacity: 2ml
  • Child Proof Top Fill Capability
  • 7 Backlit Color Options, Red, Yellow, Green, Blue, Indigo, White & Purple
  • Colors Can be Turned Off
  • Single Button Operation
  • Dual Circuit Protection
  • Over-Charge Protection
  • Overcurrent Protection
  • Over-Discharge Protection

Pick up a Joyetech eGo AIO for around $25.00

Joyetech eGo AIO


Aspire Plato

Aspire Plato AIO


Aspire just had to jump into the AIO party

The Aspire Plato is a slick looking brushed aluminum mod. The coils that you can use for the Plato are 0.4Ωs Clapton coils and 1.8Ω Kanthal Nautilus coils. The Plato has a max output from 20 – 50 Watts or 200 – 600°F in TC mode.

The Plato is powered by a single 18650 battery (Fig:1). The battery is held in place with the cover that is held in place with magnets. Much in the same way the IPV series mods.

The airflow on the Plato is adjusted by twisting this knob thing at the base of the mod. Turning the knob will cover and open two bean-shaped air slots.

The tank section on the Plato will hold different amounts of juice depending on what coil you are using at that time. With the 0.4Ω coil, you can fill the tank to 4.6mls and with the 1.8Ω coil you will be able to fill the tank up to a whopping 5.6mls of juice. That is a hefty amount for an AIO system. To fill the Plato You can access the juice port by unscrewing the door with a provided key or anything like loose change or screwdriver.

Plato Specifications

  • Output Range Watts: 1.0W – 50W
  • Output Range Temperature: 200°F – 600°F
  • Tank Capacity: 4.6mls with 0.4Ω Coil & 5.6mls With 1.8Ω Coil
  • Coil Options: 0.4Ω Coil (10 to 13W) & 1.8Ω Coil (40 to 50W)
  • Single 18650 Battery
  • 2500 mAh Battery Included
  • Micro USB Charging Port
  • Stopper Sealed Fill System
  • OLED Screen

Pick up an Aspire Plato for around $70.00

Aspire Plato AIO Mod


Joyetech eGrip II 80W

eGrip_II_Kit_img-1


Its Got A Flappy Bird Game!!!!

The Joyetech eGrip II is our second Joyetech product in this list. With the latest 4.03 firmware, the eGrip is the first mod ever to feature a video game mode based off the popular game flappy birds built into the device. This is insanely not needed but they why not I suppose (Fig:2). Besides the video game, the eGrip is a pretty nice mod.

Besides the absurd video game mode that I kinda love the eGrip II has the first digital analog clock display. So you can use your mod as a watch. This is something I have wanted in a mod for a long time. I really did. Id love to be able to look at my mod and tell the time. This is a feature I really hope catches on (Fig:2).

Able to push out up to 80 Watts and up to 600°F in temp mode. The coils for the eGrip are the famous new Notch coil with a resistance of 0.25Ω, the BF ss316 DL coil that runs at 0.5Ω and the BF Clapton MTL coil that runs at around 1.5Ω. If pre-made coils aren’t your cup o’ tea you also have the choice to use the RBA head that will let you build your coils.

eGrip II Specifications

  • Output Range: 1.0W – 80W
  • Temperature Range: 200°F 600°F
  • Atomizer Range: 0.05Ω – 1.5Ω
  • Built in Flappy Bird Game
  • Built in Real Clock W. Analog/Digital Display Settings
  • 0.96 OLED Display
  • 2100 mAh Integrated Battery
  • Rocker Adjustment Switch
  • Upgradable Firmware
  • Coil Options: Notch Coil (0.25Ω), BF SS316 (0.5Ω), BF Clapton MTL (1.5Ω)

Pick up a Joyetech eGrip II for around $65.00

Joyetech eGrip II


Europa

EUROPA_aio_vaping_device_img_1


The Vaping Cell Phone’s Little Brother

The Vaporcade Europa is another one of these AIO devices that run on cartridges. This is starting to become a trend. The Europa is probably ONLY going to be useful to a very new vaper or someone who is only doing it for a short time. This time around you gets the choice of up to 5 basic flavors. Peach, Spearmint, Coffee, Raspberry & Apple. So unless you love any of these flavors, then this is not for you. The “Shuttles” hold 6mls of juice and once you are out you need to install a new one, no refilling.

The main “Mod” section that the Cartridges or “Shuttles” clip onto is a pretty slick looking device. (Fig:3) The Europa is thin as they come looking more like a paper thin cell phone then a mod.

Europa Specifications

  • Adjustable Voltage & Wattage
  • 5 Flavors Available Peach, Spearmint, Coffee, Raspberry & Apple
  • 6ml Tank Capacity
  • Cartridge Style Device (No Refilling Tank)
  • 2200 mAh Internal Battery
  • Coil Options: 1.7Ω
  • Output: 5.0W – 12W (Ya…)

Pick up a Vaporcade Europa for around $60.00

Vaporcade Europa


Kanger NEBOX

Kanger NEBOX


The Leaky Box That Could

The Kanger NEBOX is Kangers version of the AIO System. I have to start this out with a little something. This box leaks. It leaks for about 50% of the people I talk to that have one. Now this box has been released for sometimes now and Kanger should be working on a fix if not already. I have learned that if you leave the box on its side, you should be good.

But leaving it standing upright like a normal box and it leaks out of the bottom filling port. That has been the issue with many vaping products. Whenever you have something that holds juice, and you fill it from the bottom it will sooner or later leak, Not all do but that’s one of the HUGE issues with the original Kayfun. That and the annoying whistling overtime you took a hit.

But as a true AIO, we had to feature this in the article. The Kanger Nebox can push out up to 60 watts of power and up to 600°F. The coils that you use with the Nebox are the 0.15Ω SSOCC head, the 0.5Ω SSOCC and the RBA head that lets you build the coils.

The tank will hold a MASSIVE 10mls of juice. That is a great amount and will probably last you most of the day, if the juice doesn’t leak out…. Like we spoke about above you fill the tank via a port in the base much like the battery door. (Fig:3)

The Nebox, like most of the AIO systems, runs off a single 18650 battery. You access the battery by using a quarter or something and unscrewing the bottom door. (Fig:3)

NEBOX Specifications

  • Dimensions: 3 3/8′ X 2 1/4″ – 7/8″
  • Output Range Wattage: 1.0W – 60W
  • Tank Capacity: 10ml
  • Coil Options: SSOCC Coils (0.5Ω)
  • RBA Head Included
  • Compatible With Kanger’s Square OCC Coil Heads
  • Resistance Limit: 0.15Ω
  • Powered By Single 18650
  • Micro USB Charging Port

Pick up a Kanger NEBOX for around $45.00

Kanger NEBOX


Pin It on Pinterest

Share This