July is coming to an end. We have seen some pretty great products come this month. But we saved the best for last. We have 7 Box Mods, each with something special that will help move the vaping market forward.

From vibrating mods to Bluetooth 4.0, we even have one that comes with a social network to share and be social with other owners of the same mod. All of these were chosen because they were

  • New
  • Unreleased
  • Innovative
  • Awesome

Synthcloud Spectra 200W TC

Synthcloud Spectra 200W TC Box Mod

The Synthcloud Spectra box mod features the all new SBT-200UTC chipset. With this chip, the Spectra can pump out up to 200 Watts or 600 °F in temperature control mode.

The new SBT-200UTC chipset is a revolutionary chip that you will most likely be seeing in more box mods. This chip features something called Universal Temperature Control. UTC will allow you to use the full “Spectrum” (that’s how they got the name) of coil materials from Kanthal A1, Ni200 Nickel, Titanium. Able to fire coils with a resistance down to 0.04Ω in TC mode and in VW mode you can fire coils down to 0.2Ω.

For power, the Spectra uses dual 18650 batteries that are held snugly in place via the magnetic metal battery cover.(Fig:3) The contacts that the batteries touch are gold plated to help with maximizing conductivity.(Fig:1) When the cover is on you, get zero rattling. With the rubberized paint, this feels like a very sturdy mod.

The 510 connection is gold plated and spring loaded to adjust automatically to the different lengths of your 510 pins while keeping the conductivity strong.

You get a ton of protection with the Spectra as well. The SBTT-200UTC chip makes watches out for you Featuring  safety features like, low voltage, short circuit, high voltage, low resistance, reverse battery, overheating and overtime protection.

Spectra Specifications

  • Output Wattage: 5.0W – 200W
  • Output Temp:200°F – 600°F
  • Output Volts: 0.5V – 7.0V
  • Supported Wire: Kanthal A1, Ni200 Nickel, Titanium, Performance Wires
  • Chipset: SBT-200UTC
  • Upgradable Firmware
  • Magnetic Battery Cover
  • Gold-Plated Battery Contacts
  • Micro USB
  • 0.91 Display
  • Rubberized Coating
  • Safety Features: Low Voltage, Short Circuit, High Voltage, Low Resistance, Reverse Battery, Overheating & Overtime Protection


Synthcloud Spectra 200W TC Box Mod from VaporDNA



The Vapor Shark Vapor Flask DNA 133 Box mod is the newest and latest in a long line of great products. (Besides the paint issues in the previous models) This time around you get a DNA 133 chipset inside that can push out, “you guessed it” 133 Watts.

The Flask 133 is powered by the DNA 133 Chip, as we talked about this mod will fire up to 133 Watts or up to 600 °F in TC mode. The minimum resistance the 133 can fire is 0.1 in Wattage mode or 0.08 in TC mode.

The Flask 133 can use the extremely useful Escribe software. This software will let you customize and adjust the settings of your Vapor Shark till your heart is content. Just connect the flask to your computer and start customizing. The Flask comes with a 100 Watt limit for Kanthal but with the Escribe software, you can adjust it to go up to 133 Watts.

For power, the Flask 133 is fed by dual 18650 batteries. They are held in place with a single magnet and a small tab at the bottom of the door. “Don’t break that tab.” (Fig:1) You can charge the Flask 133 via the micro USB charging port. This will only take you about 90 minutes because the Flask 133 features an upgraded version of the popular Zip charging technology to be more efficient and will help to ensure your batteries last longer.

Vapor Flask 133 Specifications

  • Output Wattage: 1.0W – 133W
  • Output Temp:200°F – 600°F
  • Output Volts: 1.0V – 6.0V
  • Resistance Range:Wattage – 0.1 to 2.0Ω
  • Battery Type: 18650
  • Resistance Range: TC: – 0.08 to 1.0Ω
  • Supported Wire: Kanthal A1, Ni200 Nickel, Titanium, SS316, Performance Wires
  • Chipset: Evolv DNA 133
  • Upgradable Firmware
  • Magnetic Battery Cover
  • Micro USB
  • Zip Charging
  • Escribe Software Compatible
  • Autosensing Temperature Resistance
  • Cell by Cell Monitoring
  • Safety Features: Atomizer, Weak Battery, Temperature, Resistance, Auto Power Down, Heat Protection

Price: $170.00

Vapor Shark Vapor Flask DNA 133 Box mod

Leaf Power 80W TC 5000 mAh Box Mod


ELeaf’s Newest “Power” box mod is a game changer if nothing more than the fact that this mod is powered by a 5,000 mAH internal Li-Po battery. This battery will hold a charge much longer than any other internal battery currently on the market. The bigger mAh or (milliamp per hour) means the battery has a bigger gas tank  You will be able to hold more power. Not to mention able to take a charge faster. This capacity is  a big step in the right direction for mods and I can’t wait to see these being used in more devices.

The Power 80W can pump out up to 80 watts (if you couldn’t guess by the name) or 600 °F in TC mode. You have a Three memory TCR modes that will save your settings for later use. For heating elements, the IPower 80W can fire Ni200 Nickel, Titanium, and Stainless Steel coils. You also get the new Smart Mode that automatically senses the resistance of the atomizer you are using and will let you store up to 10 settings that will automatically come up next time you use that atomizer, and the resistance has been set.

The body of the IPower 80W is small measuring 49.5mm X 23.5mm X 83.5mm. This small size makes it very useful on the road. That and the internal 5,000 mAh battery make this the perfect travel partner.

The screen on the IPower 80W is a beautiful and bright dual line OLED screen that is easy to read. (Fig:3) Other features include a Gold plated 510 connection for incredible conductivity with stainless steel threads. These will help keep the threads nice and sharp to a long time to come. (Fig:2)

For protection, you have some features such as Dual circuit protection, over charge, over current, and over discharge protection. As well as reverse polarity and temperature protection and alerts.

IPower 80W Specifications

  • Dimensions: 49.5mm X 23.5mm X 83.5mm
  • Output Wattage: 1.0W – 80.0W
  • Output Temp:200°F – 600°F
  • Resistance Range: Wattage – 0.1 to 3.5Ω
  • Battery Type: Internal Li-Po 5,000 mAh
  • Resistance Range: TC: – 0.05 to 1.5Ω
  • Supported Wire: Kanthal A1, Ni200 Nickel, Titanium, SS316
  • Upgradable Firmware
  • Magnetic Battery Cover
  • Smart Mode
    • Saves Up to 10 Output Settings Per Resistance Level
    • Automatically Reads and Configures Stores Output Settings
  • Custom Logo Capability
  • Two-Line OLED Display
  • Gold Plated Spring Loaded 510 Connection
  • Safety Features: Software & Hardware Protections, Over Charge, Over Current, Over Discharge, Reverse Polarity, Temperature Protection & Alert

Price: $60.00

ELeaf Power 80W TC 5000 mAh Box Mod from VAPORDNA



The Movokin Disguiser 150W box mod is an interesting mod. It’s called “the Hiding box mod” because it has an inset 510 connection. You screw the Atty and cover it up with a battery cover like plates. If you don’t want to hide your Atty or have one that is too big to hide. You have an extender that you install that will move the 510 connection to the top similar to a standard box mod. (Fig:2) & (Fig:1)

The Disguiser can push out up to 150 Watts or up to 600 °F in TC mode. In TC mode at a resistance down to 0.10 in Wattage mode or 0.05Ω in TC mode. You can fire coils made from Ni200 Nickel, Titanium, SS, Ceramic, and Tungsten.

The screen on the Disguiser is a bright 0.91 inch OLED display with a three line display. You get a ton of info on that big three line display from, resistance, output voltage, mode, battery life.

The Disguiser runs off dual 18650 batteries. These are held in place by the spring loaded battery door. The contact in the battery tray is gold plated to help with conductivity. (Fig:3)

You have some great protection features with the Disguiser. You have a 10 second fire time, short circuit, no atomizer, low voltage, over current, and overheat protection.

Disguiser Specifications

  • Dimensions: 61mm X 45mm X 87mm
  • Output Wattage: 5.0W – 150.0W
  • Output Temp:200°F – 600°F
  • Resistance Range:Wattage – 0.10 to 3.0Ω
  • Resistance Range: TC: – 0.05 to 2.0Ω
  • Supported Wire: Kanthal A1, Ni200 Nickel, Titanium, SS316, Ceramic & Tungsten
  • Battery Type: Dual 18650
  • Spring Loaded Battery Door
  • Tank Hides in Body
  • Disguiser 510 Extended Connection for Flush Mounting of Atty
  • Optimal Tank Dimensions: 23mm Diameter or Smaller
  • Compatible With Most 24mm Tanks
  • Gold-Plated Battery Connections
  • 0.91 Inch OLED Display
  • Safety Features: 10 Second Shut Off, Short Circuit, No Atty, Low Voltage, Over Current, Over Heat Protection

Price: $55.00

Movokin Disguiser 150W box mod from VaporDNA

GeekVape GBOX 150W Box Mod

GeekVape GBOX 150W

The GeekVape Gbox is back and this time pushing out up to 150 Watts. The thing that makes this one sp special is this is a dual 26650 box mod. Yes, dual 26650. You don’t see those often anymore. Sure all day on an unregulated box mod. While being a dual 26650 box mod, GeekVape was able to keep the size relatively small.

The chip that is used on the Gbox is GeekVapes own chipset. This chip can push out up to 150 Watts and up to 600 °F. With a minimum atty resistance of 0.05 Ω in TC mode. In Tc mode, you can fire coils made with Ni200 Nickel, Titanium, and Stainless steel heating elements. The chip is also equipped with smart charging. When using the micro USB charging port to charge the mod, the Gbox will balance the batteries and help promote longer battery life.

The Gbox 150W has a big bright and easy to read top-style OLED display. On the screen, you can see the current wattage or temp, the current ohms that the atty is running at, the current battery level and volts. The top-style display makes checking it simple.

GBOX Specifications

  • Dimensions: 59mm X 36mm X 95mm
  • Output Wattage: 1.0W – 150W
  • Output Temp:200°F – 600°F
  • Resistance Range: TC: – 0.05
  • Supported Wire: Kanthal A1, Ni200 Nickel, Titanium, SS316
  • Battery Type: Dual 26650
  • Large Easy to Read Display
  • Spring Loaded Battery Door & Switch
  • Oversized Firing Button
  • Spring Loaded 510 Connection
  • Micro USB Charging W. Passthrough Capability
  • Smart Charging Technology

Price: $60.00

GeekVape GBOX 150W from ElementVape

IJOY Limitless LUX Dual 26650 215W TC

IJOY Limitless LUX Dual 26650 215W TC

In collaboration with Limitless Ijoy brings us the new LUX Box mod. Like the Gbox 150W, the Limitless LUX Box Mod is powered by dual 26650 batteries. Unlike the Gbox, the LUX can also run on dual 18650 batteries. Because of how the LUX handles power and as a testament to the great things 26650’s can bring us the LUX with dual 26650’s will outlast a mod with triple 18650 batteries. (So they say)

The Lux 215W Tc can pump out up to 215 Watts of vaping power or up to 600 °F in TC mode. In TC mode you will be able to run all your basic wires Kanthal, Nickel, Titanium and Stainless Steel.

If you don’t like the look of the one you got or just want to change things up a bit, the Lux was designed to remove the outer shell easily then slide on a new one. Completely altering the appearance of the box mod. Or maybe you broke your first one, but the inside still works. Just buy a new casing and pop it on.

For protection you have many of the best safety features being used, Short circuit, overcorrect, over voltage, over charge, over discharge Protection and PTC Protective Circuits.


  • Dimensions: 101.8mm X 57.9mm X 31mm
  • Output Wattage: 5.0W – 215W
  • Output Temp:200°F – 600°F
  • Output Volts: 0.5V – 8.0V
  • Resistance Range:Wattage – 0.06 to 3.0Ω
  • Resistance Range: TC: – 0.08 to 1.0Ω
  • Supported Wire: Kanthal A1, Ni200 Nickel, Titanium, SS316
  • Battery Type: Dual 18650 Or 26650
  • Chipset: IWEPAL
  • Upgradable Firmware
  • Magnetic Battery Cover
  • Large Firing Button
  • 0.66″ OLED Display
  • Micro USB
  • Spring Loaded 510 Pin With Stainless Steel Threading
  • Safety Features: Reverse Polarity, Short Circuit, Low Resistance, Internal Temperature protection

Price: $69.95

IJoy Limitless LUX Dual 26650 215W TC from MyVapeStore

SMOKTECH XCude Ultra Box Mod


The SMOKTECH XCube Ultra Box Mod is one of the most feature packed mods on the market.From vibrating notifications to smartphone connectivity this version of a loved mod comes with 10 upgraded features over the previous version, the XCube Ultra is as innovative as they come.

Let’s start off with power. The XCube 2 was able to pump out up to 160 Watts. That wasn’t too bad. But the new XCube Ultra will push out up to 220 Watts of cloud smashing power. Powered by Smokes X3 Chipset the XCube Ultra has 5 presets for easy adjustments. Nin, Soft, Normal, Hard & MAX. These 5 settings will help you quickly find the perfect setting. Usually Max.

The Ultra is powered by dual 18650 batteries that are firmly held in place underneath the magnetic battery tray. Along with helping push out 220 Watts the new X3 Chip also allows for smart charging. This will help prolong the life of your batteries.

Like the Previous XCubes the Ultra’s firing button is along the entire side of the box. Just squeeze the body to vape. Also down the side of the body you have a strip of colored LED’s to help make your mod….. Pretty?

Some of the more exotic features that the XCube Ulta comes with, you will get feedback from the Ultra by way of vibrating notifications. Such as low battery. Another interesting feature that was first used in the Quontum 80W is the ability to Upgrade the mod over the air via Bluetooth 4.0. Along with that, you can also connect to the new Vaping Tour App. “This will allow you to manage your personal data or share your experience in the virtual world”

XCube Ultra Specifications

  • Dimensions: 94mm X 55mm X 25mm
  • Output Wattage: 6.0W – 220W
  • Output Temp:200°F – 600°F
  • Resistance Range: TC: – 0.06
  • Supported Wire: Kanthal A1, Ni200 Nickel, Titanium, SS316
  • Battery Type: Dual 16650
  • Temperature Coefficient of Resistance (TCR Mode)
  • Bluetooth 4.0 Sart App Connection/Upgrading Firmware
  • Chipset: X3
  • Smart Charging Balancer
  • Full Vertical Firing Button Along Entire Body
  • Magnetic Battery Cover
  • Micro USB
  • Over-The-Air Tech (OTA)
  • Community Sharing “Vaping Tour” APP

Price: $64.95

Smoketech Xcube Ultra Box Mod from Element Vape

Keep the Education Going

10 Innovative & Un-Released Box Mods Happy Thursday the 16th, boy oh boy if you have been looking for a new Box mod there has been no better time than now. At the date of writing this art...
9 Innovative New Box Mods for June 2016 The vaping industry is seeing a very fast paced market innovate and push out new products faster and faster all the time. That is just fine with me be...
8 Best A.I.O (All In One) Vaping Systems Recently I wrote/Updated an article that featured "Bottom Feeder Box Mods". In that article we featured a few AIO systems because the mechanics and de...
7 Rad New Box Mods for May 2016 It's May so that means we are well on our way to summer. With BBQ's and parks to go to it's a smart idea to have a good mod with you. Gotta have that ...
7 Awesome Bottom Feeder Box Mods Bottom Feeder type mods - have been floating around for a while. Not really hitting mainstream but always present, in the background. Then a few small...

Pin It on Pinterest