In the process of making this article, we soon found out all the RDA’s picked were squonk ready or highly suggested squonk RDA’s.

If you don’t know what all this Squonking is about, a Squonk box mod is just another way to say bottom feeder mod. THis means that the mod will have a tank that when squeezed pushed e-juice up to the RDA allowing you to vape. For more info check out this article.

Iconic by Vandy Vape

Features:

  • 25mm diameter
  • Bottom Feeder ready (includes BF pin)
  • Clamp Style Posts
  • Slanted Airflow Inlets
  • Dual O-rings
  • Gold-plated 510 pin – Adjustable 510 connection
  • 18mm Delrin drip tips
  • SS 510 connection threading

The Vandy Vape Iconic RDA has just about everything you would want in a Squonk box companion. Everything from the airflow to deck is designed with squonking in mind.

Vandy Vape Iconic Parts

The deck has an 8mm deep juice well making it perfect for squonking.One thing that was pointed out to me is this RDA really should only be used for Squonking simply because the posts do not have a gap to let your juice drop down into the juice well. when you drip the juice will hit the center of the post. Because of this and the fact that everything about this wonderful RDA is perfect to go with a squonk type box, I would highly suggest using this baby with a squonker aka bottom feeder.

Vandy Vape Iconic Deck

The posts on the Iconic are of a clamp design making it great for holding your leads in place at the same time giving you amazing connection points with great conductivity.

Vandy Vape Iconic Airflow

The Airflow on the Iconis is another feature worth mentioning. This is a bottom airflow RDA meaning the airflow comes in under the deck and up through the coils giving you amazing flavor and vapor production. Unlike most RDA’s the airflow is fed via slanted inlets that point directly at the coils. (Seen above)

Pick up a Vandy Vape Iconic for around $36.99 at OriginVape.com

 


 

Mad Dog V2 by Desire Vape

Desire Vape Mad Dog V2 24mm RDA

Features:

  • 24mm Diameter
  • Two Post Build Deck
  • Shared Dual Terminals
  • 8.5mm Deep Juice Well
  • Double O-Ring Secured
  • 24K Gold Plated Deck
  • PEEK Insulator
  • PEI Deck Spacer
  • Adjustable Side Airflow (Angled Towards Coils)
  • Single Slotted 8mm Airslot Per Side
  • 10mm Wide Bore Teflon 810 Drip Tip
  • 24K Gold Plated 510 Connection
  • Bottom Feed Pin Included in Package

Like the last RDA we spoke about the Mad Dog RDA is also a squonking type of RDA. This one can be used without the bottom feeder box mod but it really like them.

To start the build deck features 4 unified posts and a very deep 8.5mm juice well.

The airflow is adjustable and much like the Iconic RDA, the airflow is angled towards the bottom of the coils giving you amazing flavor and cloud production.

 

Pick up a Mad Dog V2 for $29.99 from VaporDNA.com 


 

Nudge by Wotofo

Wotofo Nudge

Features:

  • 24mm Diameter
  • Staggered Z Post Three Post Four Terminal
  • Outer Post Single Terminal
  • Center Post Double Terminal
  • Top Mounted Philips Screws
  • 6mm Deep Juice Well
  • PEEK Insulator
  • Floating Center Post for Larger Juice Capacity
  • 3mm by 2 Each Terminal Opening
  • Double O-Ring Secured
  • Side Airflow System
  • Dual 7mm by 3mm Airslots
  • Stainless Steel Construction
  • 24K Gold Plated 510 Connection

The Nudge RDA by Wotofo is another one of these amazing Squonk style RDA’s. It will work perfectly with any type of mod but baby does it like to squonk. The kit comes with a Squonk pin for easy converting.

The air on the Nudge RDA is a side airflow design. Meaning the air comes in from the side, hitting the coils and then moving on up to your face.

One great feature with the Nudge is the Z post design. This helps when you are using the RDA like a normal dripper as the posts are far apart. Then when you are squonking the juice will come up from the bottom directly hitting your coils and cotton.(Both seen below)

There is also a mod called the Nudge to go along with the RDA but this is sold separately.

Pick up a Wotofo Nudge RDA for $35.99 from VaporDNA.com


Vandy Vape Phobia

Vandy Vape

Features:

  • 24mm Diameter
  • Postless Build Deck
  • Accommodates Single & Dual Coil Configurations
  • Side Tension Applied Via Gold Plated Hex/Phillips Head Screws
  • Deep Juice Well
  • Centrally Located Bottom Feeding E-Liquid Splitter
  • Dual Adjustable Bottom Airflow Control
  • Direct Bottom & Side Airflow
  • 510 & 810 Drip Tip Compatible
  • Proprietary 24mm Chuff Cap
  • Squonk Mod Compatible
  • Gold Plated Pin

The postless deck design of the Phobia will allow for single or dual coil setups. The RDA was designed for dual coils but single coils are perfectly fine. You secure the leads via two grub type screws along the side.

Vandy Vape Phobia RDA

The Phobia is a bottom airflow RDA meaning the air comes in from the bottom via two cyclops ports that shoot air directly under and to the side of the coils giving you amazing flavor and vapor production.

Vandy Vape Phobia RDA

Much like some of the other RDA’s in this list the Phobia is a wonderful squonk (bottom feeder) type of RDA.

Pick up a Vandy Vape Phobia from Eciggity.com for TBA


VP (VaperSTUFF Project) RDA

Features:

  • 24mm Diameter
  • Conical Building Post Design
  • Single Terminal Per Post
  • 3mm Terminals Per Post
  • Side Mounted Flathead Screws
  • 3mm Deep Juice Well
  • Double O-Ring Secured
  • Side Airflow System
  • 8mm by 2.5mm Each Airslot
  • Knurled Grip To Adjust Airflow With Ease
  • 9mm Wide Bore 810 PEI Drip Tip
  • Gold Plated 510 Connection/Bottom Feed Pin
  • 304 Stainless Steel Construction

The VP is a VaperStuff Project to design a great RDA. Well I think they did it. Much like the other RDA’s this too is Squonk material.

The VP is a side airflow RDA with two cyclops air inlets flanking either side measuring 8mm by 2.5mm Each.

Pick up a Hellvape VP for $29.99 at VaporDNA.com

Keep the Education Going

5 Must Have RTA’s for 2018 Vandy Vape Kensei Specifications: 24mm Diameter Base Threaded Top Fill Design 4ml Maximum Capacity Bubble Glass Tube Staggered H...
7 New RTA’s For July 2016 Are you in the market for a new RTA (Rebuildable Tank Atomizer)? Or just bored and want to see some new kick ass tanks that have just recently been re...
7 Awesome Bottom Feeder Box Mods Bottom Feeder type mods - have been floating around for a while. Not really hitting mainstream but always present, in the background. Then a few small...
Best Bottom Feeder Mods Check out the recent article 7 Awesome Bottom Feeder Box Mods Bottom feeders have been around in the DIY community for a long time, they are really ...

Pin It on Pinterest