Vandy Vape Kensei

Vandy Vape Kensei

Specifications:

  • 24mm Diameter Base
  • Threaded Top Fill Design
  • 4ml Maximum Capacity
  • Bubble Glass Tube
  • Staggered Height Posts
  • Top Mounted Flathead Screws
  • Honeycomb Airflow System
  • Two Unified Wicking Port Cutouts
  • Adjustable Juice Flow Control
  • Extended PEEK Insulator
  • Gold Plated Build Deck
  • Dual Adjustable Airflow
  • Three Positive Locking Positions
  • Gold Plated 510 Contact
  • Adjustable 510 Pin

The Kensei RTA is one of those all around pretty dang good tanks. Lets start off with the heart of the beast, the build deck. Featuring a 4 post in a staggered layout that allows you to easily build on. Ofcourse as you can see everything is plated in gold. This will help with conductivity and longevity of the deck.

One of the first things you notice is the honeycomb mesh on the deck. This is to direct airflow directly under your coils and into your gullet providing you with some great flavor and vapor production. As you can see in the image (below) the airflow comes into the deck from the two side ports, under the coils and, out the top.

The tank can hold 2ml or 4ml. This depends on what glass section you want to use. The stock glass will give you the 2ml size. But you can put in the bubble tank section and get double the juice capacity. This bulge or bubble design is getting more popular these days.

Get a Vandy Vape Kensei for only $37.99 from VaporDNA.com


TIGERTEK SPRINGER S RTA

Specifications:

  • 24mm Diameter
  • Threaded Top Fill System
  • Two Large Fill Ports
  • Gold Plated Two Post Build Deck
  • Spring Loaded Clamps
  • Four Terminals Per Post
  • Two 1.5mm Terminal Holes
  • One 2mm by 2.5mm Terminal
  • One 2.5mm by 3mm Terminal
  • 2ml or 3.5ml Capacity With Bubble Tank (included)
  • Double O-Ring Secured
  • PEEK Insulator
  • Dual Adjustable Bottom Airflow
  • Single or Dual Coil Capability
  • 6.5mm Bore 510 Delrin Drip Tip
  • Gold Plated 510 Connection

To start out the TIGERTEK SPRINGER S RTA is a dual post RTA. The posts and deck are gold plated for optimum conductivity. The big deal and reason behind its name Springer is the way you install the coils. With most decks, you would need to get out a screwdriver un-screw the posts, slide in the leads and tighten them down hoping not to drop the tiny screw.

With the Springer you simply press down on the top of the posts and slide in the coil. Done.

You can’t get more simple than this. If you are wondering how long the springs will last adn what to do when one gets old, well they have you covered. The entire thing can be taken apart and easily replaced.

The tank section can hold up to 2.5 or 3.5 mls of juice with the bigger bubble tank installed. As far as airflow goes, the airflow comes in from the base, goes under the coils to provide great flavor.

 

 

Pick up a Tigertek Springer RTA for $28.99


GEEKVAPE Zeus 25MM “Leak-proof” RTA

Specifications:

  • 25mm Diameter
  • 4ml E-Juice Capacity
  • Quarter Turn Top Fill System
  • Silicon Cap Placed ontop to Prevent Leakage
  • Two Post Rebuildable Deck
  • Single Terminal Per Post
  • 3mm Diameter Each Terminal
  • Side Mounted Flathead Screws
  • PEEK Insulator
  • Large 5mm by 4mm Wicking Slots
  • Three Dimensional Airflow
  • 10mm by 3mm Dual Adjustable Top Exterior Airslots
  • Fully Closeable

  • Central Internal Airflow
  • Dual 6mm Airslots
  • Side Internal Airflow
  • Nine 1mm Diameter Airholes Per Side
  • 11mm Tapered Bore Delrin 810 Drip Tip
  • 810 Drip Tip Fitted
  • 11mm Bore Delrin 510 Drip Tip
  • Gold Plated 510 Connection

The new GEEKVAPE Zeus is said to be “leak proof”. That is a big claim for an RTA. On GEEKVAPE’s website, they say “eliminates leakage issues by implementing an improved top airflow design.”

The Airflow on the Zeus is a top-down airflow design. Unlike most traditional top airflow RTA’s the Zeus takes the air moves it down and is directed to hit the coils from the side.(Seen below) One nice thing is the top cap is designed with a groove so you can only put in on a certain way. It just so happens this way will keep the coils perfectly inline with the airflow.

The Zeus is a single coil RTA much like the Kayfun back in the day.  The leads for the coils are built into the deck, giving you a really clean build. To fill the tank you simply rotate the top section and lift off the top to reveal the filling holes.

Pick up a GEEKVAPE Zeus RTA for $29.99 from VaporDNA.com


Wotofo Bravo RTA

Specifications:

  • 25mm Diameter
  • 304 Stainless Steel & Pyrex Glass Construction
  • Knurled Half Turn Top Fill Design
  • 4.5ml / 6ml E-Liquid Capacity
  • 2 Post Clamp Design
  • Designed For Dual Coil Configurations
  • Elevated Deck

  • Banked/Angled Internal Airflow Design
  • Directs Airflow Around Both Sides Of Coil For Optimal Flavor
  • Large Quad Wicking Holes
  • PEEK Insulator
  • Knurled Dual Adjustable Bottom Airflow Slots
  • 510 & 810 Drip Tip Compatible
  • 11mm Bore Delrin 510 Drip Tip
  • Gold Plated 510 Pin

The Wotofo Bravo RTA features a dual post design featuring clamps that help hold the coils in place. This clamp type of design is really great because it has more surface area that is in constant contact with the leads and deck giving you amazing connections.

The tank section can hold up 6mls of juice with the bubble tank section installed. You get 4 large wicking ports to help keep your cotton from getting dry. The posts are elevated to help move the airflow from under the coils up to your face giving you fantastic flavor.

To fill the tank you simply unscrew the top cap and simply fill it up.(seen below) One nice feature is the large filling ports. This will help with some juice bottles that have a large tip. Some tanks have a tiny filling hole that can get messy with larger tips.

Pick up a Wotofo Bravo for $36.99 from Eciggity.com

 

Keep the Education Going

5 MORE RTA’s for 2018 EHPRO BACHELOR X 25MM RTA Features: 25mm Diameter Threaded Top Fill System Two Large Kidney Fill Ports 3.5ml Stock Tank Section ...

Pin It on Pinterest