Happy Thursday the 16th, boy oh boy if you have been looking for a new Box mod there has been no better time than now. At the date of writing this article, more than half of the mods listed are un-released. You won’t find newer mods than un-released.

Like always these Box Mods were chosen for their:

  1. Quality
  2. Newness
  3. Innovativeness

Whether you are a new vaper that is looking to get into the vaping scene or a veteran seeking to upgrade to a new mod, you will be hard pressed not to find something on this list that doesn’t interest you in some way.

KangerTech Dripbox 160

KangerTech Drip box 160

The new KangerTech Drip Box 160W is controlled by the same PCB that is in the KBOX 160W. Just with a Dripbox casing around it. The new PCB gives the Drip Box a massive wattage increase over the original Drip box that only pushed out 60 Watts. This new Dripbox will push out up to 160 Watts in 0.1 W increments. These new features help bring the Drip box to a whole new realm in the vaping community.

Besides being able to push out up to 160 watts, you can also run in TC (temp control) mode. In TC mode, you can run the mod from 200 °F to 600 °F. While in TC mode, the Dripbox can fire coils made from, Ni200 nickel, Titanium, and Stainless steel with a minimum resistance of 0.05 Ω.

The Dripbox 160W runs on dual 18650 batteries. The batteries are held in place with the swing open battery door on the base of the mod. (Fig:1) The bottle that contains the juice will still hold 7ml of juice that you squeeze out to wick your cotton.

Kanger didn’t skimp on the quality of materials when they designed the Dripbox 160W. The body is made from a Zinc Alloy to make the mod lightweight and durable. For the spring loaded 510 connection Kanger went with Gold plating to help with corrosion resistance as well as unmatched conductivity.

To top all of that, besides the cool new output and the top quality materials used the Dripbox  is also safe. Well relatively safe, how about that. The Dripbox 160W features some great safety features such as low battery, short circuit, reverse polarity and overtime protection. These features will help to make sure you and your batteries are kept safe.
Dripbox 160 Specifications

  • Dimensions: 120.65mm X 50.8mm X 25.4mm
  • Wattage Output: 7.0W – 160W
  • TC Output: 200°F – 600°F
  • TC Supports: Ni200 Nickel, Titanium, Stainless Steel
  • Minimum Atomizer Resistance: Watts 0.1Ω – TC 0.05Ω
  • 7ml Tank Capacity
  • Protection: Low Battery, Short Circuit, Reverse Polarity, Overtime Protection
  • Micro USB Charging Port
  • Gold Plated Spring Loaded 510 Connection
  • Zinc Alloy Construction

Grab a KangerTech Drip box 160 for around $65.00

KangerTech Drip box 160


SMY SDNA75 TC DNA 75 Box Mod

SMY SDNA75 TC DNA 75 Box Mod

The SMY SDNA75 TC DNA 75 Box mod features Evolv’s DNA 75 Watt chipset. If you are familiar with the DNA 200, then you will be familiar with the 75W version. This 75W version is just like that only pushing out 75 Watts VS 200 Watts.

In TC (Temp control) mode, the SDNA75 will heat the coils from 200 °F to 600 °F and will support coils made from, Ni200 nickel, Titanium and Stainless steel.

Measuring a miniature 84mm X 44mm X 23mm the SDNA75 is small, compact and perfect for on the go vaping. For power the SDNA75 is powered by a single 18650 battery that is held in place behind the magnetic battery cover. (Fig:1)

You connect the SDNA75 to a computer via the Micro USB port (Fig:3). From there you can customize your mod using the popular and amazing Escribe software. This Escribe software is one of the coolest features about these mods. You can fine tune and customize almost every aspect of the mod. You will also be able to upgrade the firmware and charge the mod via the same Micro USB port.

SDNA75 Specifications

  • Dimensions: 23mm X 84mm X 44mm
  • Wattage Output: 1.0W – 75W
  • TC Output: 200°F – 600°F
  • TC Supports: Ni200 Nickel, Titanium, Stainless Steel
  • Magnetic Battery Door
  • 0.91 OLED Display
  • Escribe Companion Software for Customization
  • Micro USB Charger
  • Upgradable Firmware
  • Oversized Firing Button

Pick up an SMY SDNA75 TC DNA 75 Box mod for around $100.00

SMY SDNA75 TC DNA 75 Box mod


Teslacigs Stealth 100W

Teslacigs_Stealth_100W_box_mod_img_1

The Teslacigs Stealth 100W is a tiny mod that surely lives up to its name “Stealth”. Coming in an all matt black finish kinda like a B-2 Stealth Bomber. The first thing you notice is the inset tank that looks to be inspired by Tesla’s other mod the Tesla Nano 60W.

The Stealth can push up to 100 Watts BUT in order to change the wattage you need to swap out the coil. You see the Stealth has no screen, no adjustable wattage or Temp control. The way you adjust the wattage is by changing out the coil you are using. If you want higher wattage then use a coil with lower resistance and for lower wattage use a coil with higher resistance. This will be a deal breaker for some but as long as you know what you like to vape at and find the combo that works for you this shouldn’t be an issue.

The Stealth features a 2200mAh internal battery. This battery will last for a good part of the day but if you are using Sub-Ohm coils the time will be shorter. You charge the battery via the Micro USB charging port located at the top next to the firing button.

The size of the tank you use with the Stealth is going to be limited at 22.5mm because of how the tank is recessed into the body of the mod. You get a silver plated, brass 510 connection for incredible conductivity. The firing button is located facing up, so to fire the mod you would press in a downward motion.

If you get the Stealth as a kit, you will also get the Tesla Shadow tank. This kit also will come with two types of coils one SS316 0.26 Ω coil and an SS316 0.6 Ω coil. Both are the new Notch coil design.

Stealth Specifications

  • Dimensions: 49.5mm X 25mm X 70mm
  • Wattage Output: 100W
  • Minimum Atomizer Resistance: Watts 0.1Ω
  • No Adjustable Wattage/TC
  • 2200mAh Integrated Lithium Polymer Battery
  • Micro USB Charging Port
  • Silver Plated Spring Loaded 510 Connection
  • Recessed Stealth 510 Connection
  • Protection Includes: Low Voltage, Atomizer Short, Charging, Over Puff Protection
  • Compatible With 22.5mm Atties

Grab a Teslacigs Stealth 100W Box Mod for around $45.00

Teslacigs Stealth 100W Box Mod


 LOST VAPE HALCYON DNA 200

The Lost Vape Halcyon DNA200 Box Mod is the newest mod to come out of Lost Vape lineup. Lost Vape has been pumping out really great mods lately like they were going out of style. But this one is a little different. The Halcyon DNA200 is a Squonk box ready box mod.

Being a Squonk ready mod, the Halcyon DNA200 comes with a bottle that sits next to the battery. When you squeeze sends juice up to the RDA to wick the cotton. The bottle will hold up to 8mls of liquid, so that should last you a good part of the day before needing to refill. You have a little cut out on the body that reveals the bottle giving you easy pumping access.(Fig:2)

The chip that drives the Halcyon is the Evolv DNA200. The DNA200 will pump out up to 200 Watts of vaping joy. Because this is the Evolv chipset, you will be able to plug this mod into your computer and customize everything via the Escribe software. One of the coolest and most useful Vaping software/Mod packages on the market.

The battery that the Halcyon uses is a 900mAh FullyMax 3 Cell Lipo battery. This size will last most of the day again at an average vaping speed.

Halcyon Specifications

  • Dimensions: 90mm X 50mm X 26mm
  • Wattage Output: 1.0W – 200W
  • TC Output: 200°F – 600°F
  • TC Supports: Ni200 Nickel, Titanium, Stainless Steel
  • Minimum Atomizer Resistance: Watts 0.1Ω – TC 0.08Ω
  • Cell By Cell Monitoring
  • Cell Balancer: 1A USB Charger
  • Escribe Software Compatible for Customization
  • Autosensing Temperature Resistance
  • Lock Mode, Stealth Mode, Power Lock Mode, Resistance Lock, Max Temperature Adjustment

Pick up the LOST VAPE HALCYON DNA 200 Kit for $200.00

LOST VAPE HALCYON DNA 200 Kit


Sigelei 200W Temperature Control

sigelei-200w_temperature_control_img_1

The all new Sigelei 200W TC TFT LCD Box Mod at the time of writing this article is still yet to be released. But things are looking great. You have a crystal clear 45mm X 35mm TFT LCD screen or A thin-film-transistor liquid crystal display. This display uses a thin-film to help improve image qualities such as contrast and addressability.

The 200W TC can fire up to well… 200 Watts or up to 662°F in TC mode with a minimum resistance of only 0.05Ω. In Tc (Temp Control) mode, you can fire coils made from Ni200 Nickel and titanium. The dual 18650 batteries are held in place via 4 strong magnets that help hold battery cover in place.

But with all the fancy TFT LCD technology it’s good to see Segelei still watching out for us users by adding in a bunch of safety features. You get low voltage, low resistance, high input, short circuit, reverse polarity and overheating protection. These six safety features make this mod an excellent choice for new vapers, as long as you don’t crank it up to 200W by mistake and melt your face off.

Specifications

  • TFT LCD
  • Screen Dimensions: 45mm X 35mm
  • Wattage Output: 5.0W – 200W
  • TC Output: 212°F – 662°F
  • TC Supports: Ni200 Nickel, Titanium
  • Minimum Atomizer Resistance: Watts 0.05Ω – 2.5Ω
  • Dual 18650 Batteries
  • Low Voltage, Low Resistance, High Input, Short Circuit, Reverse Polarity, Overheating Protection
  • Dual Temperature Control Output Support

Pick up a Sigelei 200W TC TFT LCD Box Mod for around $TBA

Sigelei 200W TC TFT LCD Box Mod


Vaporesso Target Mini

Vaporesso Target Mini Box Mod

The Vaporesso Target Mini is the pint-sized cousin of the original Target box mod. The Target Mini is tiny about 36.5mm X 24.2mm X 58.1mm in size or about the same size as the Artery Vapor Nugget 50W Nano box mod. (Fig:3)

Even for the tiny nature of the Target Mini, she can still push out up to 40 Watts or 600 °F in TC mode. While in TC (temperature control) the Target mini supports Ni200 Nickel, Titanium, and the cCell Ceramic heating elements. With a 1400mAh internal battery, you will be able to vape for a good part of the day making this mini perfect for running to the store.

Vaporesso didn’t hold back on safety. The target mini has all the safety features you would expect or want from a VW Box mod. Over temp protection, low resistance, short circuit, and overcharge protection.

Target Mini Specifications

  • Dimensions: 36.5mm X 24.2mm X 58.1mm
  • Wattage Output: 5.0W – 40W
  • Voltage Range: 0-9V
  • TC Output: 200°F – 600°F
  • Minimum Atomizer Resistance: Watts 0.15Ω – TC 0.1Ω
  • 0.49″ OLED Display
  • Internal Battery: 1400mAh Lithium Battery
  • Protection Features: Over temp protection, low resistance, short circuit, and overcharge protection.
  • Passthrough Capability
  • Zinc Alloy Construction
  • Carbon Fiber Inlays
  • Micro USB Charging Port

Pick up a Vaporesso Target Mini Box Mod for around $TBA
Vaporesso Target Mini Box Mod


Hugo 133 DUO

HUGO 133 TC TEMPERATURE CONTROL VW

The Hugo 133 DUO is a new box mod by a little company Hugo Vapor. On their official website, the only picture of the Hugo 133 DUO is a photo of the mod and a storm trooper from Star Wars. I guess this is implying that the mod looks like it would be something a storm trooper would use. That’s funny because I used that exact analogy to describe another mod a while ago. Anway about the Hugo 133 DUO.

Running off dual 18650 batteries the 133 DUO will push out up to 133 Watts and by the way that is a strange number to stop at, 133. That must be where the name 133 DUO comes from. In TC (Temp Control) mode the 133 DUO will heat coils up to 600 °F or 300°C While being able to fire coils made from Ni200 Nickel, Titanium and Stainless steel in TC mode.

The Hugo 133 DUO features a chipset made in house at Hugo Vapor that is supposed to give you “more stable and balanced charging.”

Hugo 133 DUO Specifications

  • Dimensions: 41mm X 88mm X 43mm
  • Wattage Output: 1.0W – 130W
  • TC Output: 200°F – 600°F
  • TC Supports: Ni200 Nickel, Titanium, Stainless Steel
  • Minimum Atomizer: 0.65Ω
  • Construction: Zinc Alloy
  • Battery: Dual 18650
  • Smart Balancing When Charging
  • Protection: High temperature, reverse polarity, short circuit, low voltage, high resistance, low resistance, over-charging, and over-discharge protection
  • Micro USB Charging
  • Passthrough Mode Available

Estimated Release Date: 6-30-16

Pick up a Hugo 133 DUO Box Mod by Hugo Vapor for around $50.00

Hugo 133 DUO by Hugo Vapor


Council Of Vapor Tempest 200W

Council Of Vapor Tempest 200W Box Mod

The Council of Vapor Tempest 200W TC Box Mod is the newest flagship product from the popular vaping company.

The Tempest is able to push out up to 200 Watts or 600 °F with the help of Council of Vapors proprietary chipset. The Tempest is powered by triple 18650 batteries that are held nicely in place inside the Zinc Alloy and Chrome chassis. To get the batteries out again you slide out the battery tray from inside the middle of the mod.(Fig:2).

The coolest part is when it comes time to close the battery tray as you slide the tray and lock it into place much like you would a magazine for a firearm. This is a new way to approach the battery tray and it will be interesting to see if anyone else picks up on this style of sled.

The outside of the Tempest is when things get pretty. The Tempest is finished with a durable rubberized finish that has a carbon fiber texture applied to the surface on the two grip pads.

Tempest Specifications

  • Dimensions: 37mm X 85mm X 58mm
  • Wattage Output: 1.0W – 200W
  • TC Output: 200°F – 600°F
  • Versatile Temperature Controle Module
  • Minimum Atomizer: 0.05Ω
  • Durable Rubberized Finish W. Carbon Fiber Texture
  • Sliding Battery Cover (Like Gun Magazine)
  • OLED Display
  • Battery: Thripple 18650
  • Construction: Premium Zinc & Chrome

Release Date: 7-5-16

Pick up a Council of Vapor Tempest 200W TC Box Mod for around $80.00

Council Of Vapor Tempest 200W Box Mod


EHPRO Evok 80W Box Mod

EHPRO Evok 80 box mod

The EHPRO Evok 80W box mod is geared to be paired with ceramic tanks. Now you don’t have to run a ceramic tank/coil but there are unique modes that help to work with ceramic.” It is specially designed for Ceramic atomizers which could be preheated in 0.5 seconds in CM

The Evok is powered by a single 18650 battery that is held in place with a neat swing door thing at the base of the mod. (Fig:2)

The Evok will fire from 5.0 Watts to 80.0 Watts or in TC mode up to 600 °F. But trust me if you are running this at 80 Watts your single 18650 will last a few hours VS half of the day.

The body of the Evok is constructed out of aluminum and Zinc alloy for lightweight and strength. For the 510 connection you have a spring loaded, gold plated connection with stainless steel threading to help with corrosion

Evok Specifications

  • Dimensions: 23mm X 83mm X 39mm
  • Wattage Output: 5.0W – 80W
  • TC Output: 200°F – 600°F
  • TC Supports: Ni200 Nickel, Titanium, Stainless Steel
  • Minimum Atomizer: 0.1Ω
  • Battery: Single 18650
  • Rotary Battery Cover
  • Gold Plated Brass 510 Connection
  • Material: Aluminum & Zinc Alloy

Release Date: 6-30-2016

Pick up an EHPRO Evok 80 box mod for around $29.00
Sigelei J150 150W Box ModEHPRO Evok 80 box mod


Sigelei J150 150W

Sigelei_ J150 150W TC Box Mod

The Sigelei is the first mod to have the Dual Li-Polymer internal battery. These are the same kind of batteries that are being used in cellphones, and laptops. They are nice because they have a slow self-discharge rate of about 5-7% Per month. Meaning if you charge this and leave it for a month. The battery will be only 5% less charged. Another great feature about the J150 with the Li-Polymer battery is the ability to charge extremely fast. Personally, that feature alone is gold.

One of the big features with the J150 is the inclusion of both TCR (Temperature Coefficient of Resistance) this is “The temperature coefficient of resistance or TCR, is one of the main used parameters to characterize a resistor. The TCR defines the change in resistance as a function of the ambient temperature” and TFR (Temperature Factor of Resistivity).

The chipset used in the J150 is the same chipset in the new Sigelei 213 mod. Able to push out up to 150 Watts or up to 570 °F the J150 features incredible accuracy and power.

J150 Specifications

      • Dimensions: 41mm X 88mm X 43mm
      • Wattage Output: 1.0W – 150W
      • TC Output: 200°F – 670°F
      • TC Supports: Ni200 Nickel, Titanium, Stainless Steel
      • TFR (Temperature Factor of Resistance Functionality)
      • TCR (Temperature Coefficient of Resistance.)
      • Dual Battery Voltage Monitoring
      • Three-Button Operation
      • Micro USB Charging – 2A Max Charge Rate
      • Spring Loaded 510 Connection

Release Date: TBA

Pick up a Sigelei J150 150W Box Mod for around $70.00

Sigelei J150 150W Box Mod


Keep the Education Going

9 Innovative New Box Mods for June 2016 The vaping industry is seeing a very fast paced market innovate and push out new products faster and faster all the time. That is just fine with me be...
8 Best A.I.O (All In One) Vaping Systems Recently I wrote/Updated an article that featured "Bottom Feeder Box Mods". In that article we featured a few AIO systems because the mechanics and de...
7 Rad New Box Mods for May 2016 It's May so that means we are well on our way to summer. With BBQ's and parks to go to it's a smart idea to have a good mod with you. Gotta have that ...
7 New Innovative Box Mods for April 2016 We all know Box mods are adapting and changing to meet the needs of the community. These are some of the newest ones to hit the market that we can pla...
7 Awesome Bottom Feeder Box Mods Bottom Feeder type mods - have been floating around for a while. Not really hitting mainstream but always present, in the background. Then a few small...

Pin It on Pinterest

Share This